搅拌一体机的4个检查规定
来源：http://www.yuanmei168.com/日期：2022-09-30
搅拌一体机属于工业车辆，做好检查规定是非常要重要的，接下来，我们看看搅拌一体机需要遵守哪些检查规定。搅拌一体机的4个检查规定如下：
The mixing machine is an industrial vehicle, so it is very important to make inspection regulations. Next, let's see what inspection regulations the mixing machine needs to comply with. The four inspection regulations of the mixer are as follows:
一、搅拌系统检查规定：
1、 Inspection regulations for mixing system:
1.筒体与托轮接触应良好，不应跑偏、窜动和严重变形。
1. The cylinder shall be in good contact with the supporting wheel, and shall not deflect, move or deform seriously.
2.搅拌筒机架缓冲件不应有裂纹或损伤；搅拌筒内叶片、进料斗、主辅卸料槽不应严重磨损和变形。
2. The buffer parts of the mixing drum frame shall be free from cracks or damage; The blades, feed hopper and main and auxiliary discharge chute in the mixing drum shall be free from serious wear and deformation.
3.搅拌筒、进料斗和主辅卸料槽不应有明显的混凝土积块。
3. The mixing drum, feed hopper and main and auxiliary discharge chute shall be free of obvious concrete blocks.
二、 液压系统检查规定：
2、 Inspection regulations for hydraulic system:
1.取力器工作时，应结合平稳，压力应达到设计的额定要求，不应渗漏。
1. When the power take-off works, it shall be combined stably, and the pressure shall meet the rated requirements of the design without leakage.
2.液压系统零部件应齐全完好，系统工作压力应符合说明书要求。
2. The components of the hydraulic system shall be complete and intact, and the working pressure of the system shall meet the requirements of the manual.
3.液压油型号、油质、油量及使用应符合有关规定；散热泵工作时油温不应超过80℃；管路连接应可靠；不应锈蚀、变形、老化、破损、渗油。
3. The model, quality, quantity and use of hydraulic oil shall comply with relevant regulations; The oil temperature of the radiator pump shall not exceed 80 ℃ during operation; The pipeline connection shall be reliable; It shall be free from rust, deformation, aging, damage and oil leakage.
4.各液压操纵部分运动应灵活、连接可靠。
4. Each hydraulic control part shall be flexible in movement and reliable in connection.
三、供水系统水泵及部件应齐全完整，不应泄漏。
3、 The water pump and components of the water supply system shall be complete without leakage.
四、装置检查规定：
4、 Inspection regulations for safety devices:
1.液压系统中应设有防止过载和液压冲击的装置；溢流阀的调整压力不得大于液压泵的额定压力。
1. The hydraulic system shall be equipped with safety devices to prevent overload and hydraulic impact; The adjustment pressure of the safety relief valve shall not be greater than the rated pressure of the hydraulic pump.
2.搅拌一体机侧面、后部的防护装置应齐全、完好。
2. The side and rear protective devices of the mixer shall be complete and intact.
3.搅拌一体机应配备灭火器材。
3. The mixing machine shall be equipped with fire extinguishers.
Strict specifications are important for the safe use of the mixer. I hope you can inspect the vehicle according to the above inspection regulations. Follow us http://www.yuanmei168.com , learn more!
全国服务热线
点击拨打服务热线：400--555-666
