自动上料赢咖7注册过滤系统的好坏，是大家关注的问题。选择一款好的滤芯对生产和有着无可替代的作用，对于它的滤芯我们怎么判断它的好坏呢？接下来小编就来介绍一下。

The quality of the filter system of the automatic feeding mixer is a matter of concern. Selecting a good filter element plays an irreplaceable role in production and environmental protection. How can we judge its quality? Next, let's introduce it.

1、看材质，材质是觉得滤芯好坏的决定因素，好的材质具有耐腐蚀，耐压，阻力小等特点。如高分子纤维的意大利产质量非常可靠。

1. According to the material, the material is the decisive factor for the filter element. Good material has the characteristics of corrosion resistance, pressure resistance and small resistance. For example, the quality of polymer fiber produced in Italy is very reliable.

2、观察滤筒的端盖和金属的接触是不是严丝合缝。

2. Observe whether the end cover of the filter cartridge is in perfect contact with the metal.

3、看自动上料赢咖7注册滤芯是否可以循环使用，能不能用水清洗，使用寿命大概多久。

3. Check whether the filter element of the automatic feeding mixer can be recycled, whether it can be cleaned with water, and how long the service life is.

4、考虑自动上料赢咖7注册的滤芯精度和透气性如何。

4. Consider the filter element accuracy and permeability of the automatic feeding mixer.

我们通常根据物料的颗粒大小进行选择，对于颗粒较大的物料，可选择过滤精度较大的过滤器，反之对于颗粒较小的粉末或者纳米级物料的话，则须选择高精度的过滤器了。这样才能实现自动上料赢咖7注册无尘化操作，达到提高产品质量的目的。

We usually choose according to the particle size of materials. For materials with large particles, we can choose a filter with higher filtering accuracy. On the contrary, for powder or nano materials with small particles, we must choose a filter with high accuracy. In this way, the dust-free operation of the automatic feeding mixer can be realized and the product quality can be improved.

此外每天工作结束后，司机应负责向搅拌筒内注入清水并高速(14—18转/分)旋转5—10分钟，然后将水排去，以保证筒内清洁。用高压水清洗搅拌筒各个部分时，应注意避开仪表及操纵杆等部位。压力水喷嘴与车身油漆表面间的距离不得小于40厘米。

In addition, at the end of each day's work, the driver shall be responsible for injecting clean water into the mixing drum and rotating it for 5-10 minutes at a high speed (14-18 rpm), and then draining the water to ensure that the drum is clean. When cleaning each part of the mixing drum with high-pressure water, attention should be paid to avoiding instruments, control rods and other parts. The distance between the pressure water nozzle and the body paint surface shall not be less than 40 cm.

搅拌筒内外积污及残存的混凝土渣块时，以及在机修人员进入筒内进搅拌行自动上料搅拌车在工作时应注意什么检修和焊补作业时，需先关闭汽车发动机，使搅拌筒完全停止转动。

When removing the dirt and residual concrete slag inside and outside the mixing drum, and when the machine maintenance personnel enter the drum to mix, what should be paid attention to when the automatic feeding mixer is working, the car engine should be shut down first to make the mixing drum stop completely.

在机修人员进入筒内工作期间，要保证拌筒内通风良好，空气新鲜，无可然气体及有害灰尘，氧气供应充足。在筒内使用电动工具操作时，操作人员要有良好的绝缘保护。

During the period when the machine maintenance personnel enter the mixing drum to work, ensure that the mixing drum is well ventilated, the air is fresh, there is no natural gas and harmful dust, and the oxygen supply is sufficient. When using electric tools in the cylinder, operators shall have good insulation protection.

以上就是辨别自动上料赢咖7注册滤芯好坏的技巧的问题讲解了，相信大家都已经有一定的学习了，希望大家在工作时一定要注意。更多相关事项就来我们网站http://www.yuanmei168.com咨询吧！

The above is the explanation of the skills to distinguish the filter element of the automatic feeding mixer. I believe that everyone has learned to some extent, and I hope you must pay attention to it when working. Come to our website for more information http://www.yuanmei168.com Consult!