如今许多人都开始在农村投资混凝土搅拌站，而混凝土赢咖7注册作为搅拌站中重要的部分，用户在选择时也是很谨慎，但有时候在使用过程中还是摆脱不了会出现故障问题。下面来讲讲混凝土赢咖7注册常见6个故障及对应。

Nowadays, many people begin to invest in concrete mixing plants in rural areas. As an important part of the mixing plant, users are very cautious when selecting concrete mixers, but sometimes they can't get rid of the problem of failure during use. Here are six common failures of concrete mixer and corresponding solutions.

混凝土赢咖7注册常见的故障有：

Common failures of concrete mixer include:

1.由于联接螺栓松动衬板不齐造成搅拌叶片、支撑臂衬板松动。

1. The lining plates of mixing blades and support arms are loose due to loose connecting bolts and uneven lining plates.

2.圆锥滚子轴承损坏，造成卷扬减速器嗓声异常。

2. The tapered roller bearing is damaged, causing abnormal noise of the winch reducer.

3.搅拌桶内有石子卡住搅拌叶片导致搅拌电机停止运转。

3. There are stones in the mixing bucket that jam the mixing blade, causing the mixing motor to stop.

4.搅拌叶片磨损严重，没有及时更换，造成间隙太大，石子卡塞过载，搅拌轴端支承装置阻力太大，电压偏低造成搅拌电机过热。

4. The mixing blade is seriously worn and not replaced in time, resulting in too large gap, stone jam overload, too large resistance of the support device at the end of the mixing shaft, and low voltage, causing overheating of the mixing motor.

5.轨道安装不平行或者点击制动器分离间隙过小，电压偏低，使得卷扬电机过热。

5. The track installation is not parallel, or the clearance of brake release is too small, and the voltage is too low, which makes the winch motor overheat.

6.故障指示灯灭可能是因为料斗上升个限位开关坏了或者是摇臂松动，撞针锈蚀，橡胶护套破损等等。

6. The fault indicator light may be off because the first limit switch for hopper lifting is broken or the rocker arm is loose, the striker is rusted, and the rubber sheath is damaged.

以上故障常用的排除方法有：

Common troubleshooting methods for the above faults are:

1.可以在使用前日常检查时紧固联结螺栓调平衬板。

1. The coupling bolts can be fastened to level the lining plate during daily inspection before use.

2.更换轴承。

2. Replace the bearing.

3.排除搅拌叶片与陈衬板间卡住的石子。

3. Remove the stones stuck between the mixing blade and the old lining plate.

4.更换叶片，调好间隙；在搅拌支承装置加注润滑脂。

4. Replace the blade and adjust the clearance; Add lubricating grease to the mixing support device.

5.调整轨道平行度，调整电机制动分离间隙。

5. Adjust the rail parallelism and the motor brake separation clearance.

6.修复或更换新的限位开关。

6. Repair or replace the limit switch with a new one.

混凝土赢咖7注册如果出现故障了，一定要仔细排查原因，尽量减少因为混凝土赢咖7注册坏了而耽误工程的进度。只要找明原因就会很好的找到办法，所以出现故障时，不必太慌乱，如果实在找不到原因也可以拨打厂家的售后电话，让厂家派人去帮助检查。关注我们http://www.yuanmei168.com，了解更多事项！

If the concrete mixer fails, the cause must be carefully investigated to minimize the delay in the project progress due to the failure of the concrete mixer. As long as the cause is found out, the solution will be found very well. So when a fault occurs, don't panic too much. If you really can't find the cause, you can call the manufacturer's after-sales phone and ask the manufacturer to send someone to help check. Follow us http://www.yuanmei168.com , learn more!