混凝土赢咖7注册发动机外部保养？
来源：http://www.yuanmei168.com/日期：2020-07-22
1、将混凝土赢咖7注册电器用塑料薄膜遮罩，然后用半湿性毛巾压盖于薄膜上侧，以防高压水冲进分电器，致使拌和车难以发动；
1. First, cover the electric appliance of concrete mixer with plastic film, and then cover it with semi wet towel on the upper side of the film to prevent high-pressure water from rushing into the distributor, which makes the mixer difficult to start;
2、运用高压水枪由拌和车发动机旁边面按从上到下的次序将引擎室内侧及拌和车发动机表面的附着类污物冲净；
2. Use high-pressure water gun to clean the attached dirt on the side of the mixer engine from top to bottom;
3、直接将拌和车发动机外部清洗剂均匀喷洒于泅湿后的拌和车发动机及引擎室周边；
3. Spray the external cleaning agent of mixer engine directly on the engine of mixer and the surrounding of engine room after swimming;
4、闪凉3min后，用纤维毛刷清洗引擎室内所能触及到的所有部件；
4. After 3 minutes flash cooling, clean all parts that can be touched in the engine room with fiber brush;
5、用高压水枪快速冲净刷洗掉的污物；
5. Use a high-pressure water gun to quickly wash away the dirt;
6、然后再将搅拌车发动机外部清洗剂喷洒于引擎表面，操作过程同上；循环往复，直将搅拌车发动机表面清洗洁净；
6. Then spray the external cleaning agent on the engine surface of the mixer, and the operation process is the same as above; repeat until the surface of the mixer engine is clean;
7、更终将冲洗洁净的搅拌车发动机用半湿性毛巾擦干，并用吸尘吸水风干机将手不易触及到的当地吸干，然后风干；
7. Finally, dry the washed and clean mixer engine with a semi wet towel, and use a suction and water absorption air dryer to dry the local areas hard to reach by hand, and then air dry;
8、用塑料橡胶保护剂对引擎室内侧的塑料橡胶部件进行上光，然后再将金属部件镀膜；
8. Polish the plastic rubber parts inside the engine room with plastic rubber protector, and then coat the metal parts;
9、更终对护理结束的搅拌车发动机和引擎室内侧用洁净的无纺抛光巾进行查验。
9. Finally, clean non-woven polishing towel was used to inspect the engine and the side of the engine room after the nursing.
全国服务热线
点击拨打服务热线：400--555-666
