自动上料赢咖7注册这种机械设备在长时间的使用过程中，为了能够保持其良好的操作性能，则需要我们不定期的对其进行润滑工作。那么在对设备添加润滑油的过程中我们应该要注意哪些事项呢？

In order to maintain its good operating performance during the long-term use of mechanical equipment such as automatic feeding mixer, we need to lubricate it irregularly. What should we pay attention to when adding lubricating oil to the equipment?

1、自动上料赢咖7注册在运转过程中不得检修和润滑。

1. The automatic feeding mixer shall not be overhauled and lubricated during operation.

2、定期向各黄油嘴加注黄油，轴端密封处每4小时注润滑油一次，每周排污一次。

2. Fill grease to each grease fitting regularly, fill lubricating oil at the shaft end seal every 4 hours, and drain once a week.

3、自动上料赢咖7注册在使用后酌情对各润滑点加注必要的润滑油（滚轮轴、滚轮、钢丝绳等活动部位）。

3. After the automatic feeding mixer is used, the necessary lubricating oil (roller shaft, roller, steel wire rope and other moving parts) shall be added to each lubricating point as appropriate.

4、自动上料赢咖7注册减速箱的齿轮和轴承是利用齿轮回转将机油飞溅到箱体内壁，流入轴承中去进行润滑的。减速箱的油面应保持在油标尺两刻线之间为宜。油面过高或过低会导致各部温度升高或润滑不良，增加功率损耗和造成机器工作不良。

4. The gear and bearing of the reduction box of the automatic feeding mixer splash the oil to the inner wall of the box through gear rotation and flow into the bearing for lubrication. The oil level of the reducer should be kept between the two score lines of the oil scale. Too high or too low oil level will cause temperature rise or poor lubrication of all parts, increase power loss and cause poor operation of the machine.

5、自动上料赢咖7注册选用的润滑油应具有一定购粘度和粘温特性，凝点低，抗氧化安定性良好，没有机械杂质和水分，不合腐蚀和磨损物质等。其质量指标应符合标准规定。

5. The lubricating oil selected for the automatic feeding mixer shall have certain viscosity and viscosity temperature characteristics, low freezing point, good anti-oxidation stability, no mechanical impurities and moisture, and no corrosion and wear substances. Its quality index shall comply with the provisions of national standards.

注意：新机开始使用头150小时和300小时要分别更换机油一次，以便排除试车时未完全洗净的污物。工作时，要经常检查油面高度，不足应及时添补。

Note: the engine oil shall be changed once for the first 150 hours and 300 hours after the new engine is put into use, so as to remove the dirt that is not completely cleaned during the test run. During operation, the oil level height shall be checked frequently, and the deficiency shall be supplemented in time.

自动上料赢咖7注册进行润滑工作是为了能有效减少磨损，提高元部件的使用寿命。不过在进行添加润滑油的过程中也要注意一些事项，更多相关事项就来我们网站http://www.yuanmei168.com咨询了解吧。

The lubrication of the automatic feeding mixer is to effectively reduce wear and improve the service life of the components. However, in the process of adding lubricating oil, you should also pay attention to some matters. For more related matters, please visit our website http://www.yuanmei168.com Consult and understand.