自动上料赢咖7注册设备的4个维护要点
来源：http://www.yuanmei168.com/日期：2022-11-23
要想设备的使用时间较长的话，按照规定时间进行设备保养、修理、维护，磨损配件的换新等较为重要。那么作为赢咖7注册在平时维护的时候要注意哪些方面呢？以下为您介绍4个方面，可以参考。
If you want to use the equipment for a long time, it is important to maintain, repair and maintain the equipment according to the specified time, and replace worn parts. What aspects should be paid attention to when maintaining the mixer? Here are four aspects for your reference.
1、 Automatic feeding mixer transmission system
1、赢咖7注册的传动齿轮、减速箱、链条按规定加润滑油；
1. Add lubricating oil to the drive gear, reducer and chain of the mixer as required;
2、传动部分声音正常，减速箱、轴承无发热现象；
2. The sound of the transmission part is normal, and the reducer and bearing are free of heat;
3、三角输送带松紧适当；
3. The triangular conveyor belt is properly tightened;
4、钢丝绳应没有较大的磨损，夹头与连接牢，表面涂油脂润滑；
4. The steel wire rope shall be free from major wear, the chuck shall be firmly connected, and the surface shall be coated with grease for lubrication;
5、制动器和离合器性能较好好，刹车片磨损较大应该换新。
5. The brake and clutch have good performance, and the brake pads should be renewed due to heavy wear.
二、自动上料赢咖7注册其它润滑部件
2、 Other lubricating parts of automatic feeding mixer
1、主机启动或按规定时间给赢咖7注册轴端密封注油，以使油封结构长期正常工作；
1. Start the main engine or inject oil into the shaft end seal of the mixer at the specified time, so that the oil seal structure can work normally for a long time;
2、其它加油点，如旋转、旋转的车轮和履带等，应按规定时间加油。
2. Other refueling points, such as rotating and rotating wheels and tracks, shall be refueled at the specified time.
三、自动上料赢咖7注册混合系统
3、 Automatic feeding mixer mixing system
1、检查搅拌筒运转是否稳定，衬板、叶片损坏要换新；
1. Check whether the mixing drum operates stably, and replace the damaged lining plates and blades;
2、按照规定时间清理卡在赢咖7注册内的混凝土；
2. Clean the concrete stuck in the mixer within the specified time;
四、自动上料赢咖7注册清理和紧固
4、 Cleaning and fastening of automatic feeding mixer
1、主机、支架、装载支架等设施的安装连接应牢；
1. The installation and connection of host, support, loading support and other facilities shall be firm;
2、混凝土赢咖7注册身、场地等的清洁；
2. Cleaning of concrete mixing machine body and site;
3、基础周围不应有积水，水路应在冰冻季节做好保温措施；
3. There should be no ponding around the foundation, and thermal insulation measures should be taken for the waterway in freezing season;
The above are the maintenance points of the automatic feeding mixer equipment introduced to you. Have you done it? If your mixing plant needs to be replaced or has other problems, please pay attention to us http://www.yuanmei168.com 。
全国服务热线
点击拨打服务热线：400--555-666
