Mixing machine in the process of use sometimes there will be stuffy machine trip fault, so what is the reason? We first have to find out the cause, in order to better solve, and then to prevent the failure again next time.

　　分析：外力在胶带宽度方向上的合力不为零或垂直于胶带宽度方向的拉应力不均匀。由于导致胶带跑偏的因素很多，所以需要从输送机的设计、制造、安装调试、使用维护等方面来胶带跑偏，胶带的两侧以及胶带两侧的不同高度。同样，如果在皮带运行方向的垂直截面等处不安装托辊支架等装置，也会导致皮带跑偏。

　　Analysis: the net force of external force on the width direction of the tape is not zero or the tensile stress perpendicular to the width direction of the tape is not uniform. Due to many factors that lead to the deviation of the belt, it is necessary to solve the deviation of the belt, the two sides of the belt and the different heights of the two sides of the belt from the aspects of conveyor design, manufacturing, installation, debugging, use and maintenance. Similarly, if the vertical section of the belt running direction is not installed, roller support and other devices will also lead to belt running deviation.

　　原因：投料过多，引起赢咖7注册负荷过大；搅拌系统叶片与衬板之间的间隙过大，搅拌过程中，增大了阻力；三角传动皮带太松，使传动系统效率低；搅拌主机上盖检修开关被振松，引起停机。

　　Cause: too much feeding, resulting in excessive load of mixer; The gap between the blade and the lining plate of the stirring system is too large, which increases the resistance in the process of stirring. Triangle drive belt is too loose, so that the drive system efficiency is low; The safety maintenance switch on the upper cover of the stirring machine was vibrated loose, causing the machine to stop.

　　处理：检查配料系统是否超标和是否有二次投料现象。检查赢咖7注册叶片与衬板之间的间隙是否在3~8mm。检查传动系统三角皮带的松紧程度并调整。检查主机上盖开关是否松动。

　　Treatment: check whether the batching system exceeds the standard and whether there is a second feeding phenomenon. Check whether the clearance between the mixer blade and the lining plate is 3~8mm. Check and adjust the tightness of the drive system triangle belt. Check whether the safety switch on the host cover is loose.

　　另外，在搅拌一体机的保养过程中，一定要积累一些的技能和保养方法。如果是自己不了的问题，还是需要找人员，这样才能从根本上问题，顺利完成维修。

　　In addition, in the maintenance process of the all-in-one mixing machine, we must accumulate some professional skills and maintenance methods. If you can't solve the problem yourself, you still need to find a professional, so as to fundamentally solve the problem and complete the maintenance smoothly.

　　在维修过程中，选用的维修材料一定要合适。如果材料出现问题，可能会导致后期使用过程中出现其他问题。这些问题的积累，对机器的影响是非常严重的。

　　In the maintenance process, the selection of maintenance materials must be appropriate. If there is a problem with the material, it may lead to other problems during later use. The accumulation of these problems, the impact on the machine is very serious.

　　更多详细内容，点击http://www.yuanmei168.com网站了解吧！

　　For more details, click http://www.yuanmei168.com!